[ADVANTAGES OF OIL FILLED CAPACITORS AGAINST DRY TYPE CAPACITORS]

  Impregnation is done with the help of non-toxic friendly liquid at a very high vacuum resultingin following advantages:

Impregnate fluid replaces air pockets in the zinc spray and help in eliminating partial discharges at the end contacts. Oil impregnated capacitors have much higher partial discharge voltage as compared to DR TYPE. JAIVIC impregnated Oil filled Capacitors are hermetically sealed, hence do not have any atmospheric influence compared to DRY TYPE. Capacitor wound elements are encased in metal containers of adequate thickness. The containers are are hermetically sealed. To avoid rusting, metal containers are electroplated which also result in rust free attractive and durable painting.

Penetration of liquid impregnate is thorough in comparison to semi liquid impregnate like Polyurethane, Flexible Epoxy etc. Because of its viscous nature. This makes these capacitors more stable because of improved Partial Discharge Inception voltage level.

Level of liquid impregnate is maintained sufficiently above active elements, in comparison to semi-fluid impregnate. In liquid impregnates transfer of heat by conduction and convection mode is fast. This result in uniform cooling of capacitors. In turn reducing temperature rise of active elements. This gives an extra edge by increasing life of the capacitors and to take care of rugged service conditions.

With free flow of impregnate inside capacitor containers, cooling of capacitor is uniform, making it very suitable for tropical and super tropical conditions.

Use of Inductor Coils

To avoid electrical and mechanical stresses on end connection by inrush current caused due to switching operation, our capacitors are provided with inductor coil of adequate value.

Export Worthy Packing

To avoid damages (scratches, dents etc.) in transit, individual capacitor units are packed in corrugated box using thermocole packing all around the capacitors.

ISI CERTIFICATION & APPROVALS

JAIVIC Capacitors carry ISI mark for the entire range including Banks upto 100 kVAr. JAIVIC Capacitors are approved & accepted by almost all the Electricity Boards govt. & Semi Govt.  Departments, Panel Manufacturers, OEMS etc. in India.

GUARANTEE

JAIVIC Power Capacitors are backed by manufacturer’s warranty against manufacturing  defects for a period of 15 months from the date of dispatch from the Factory or 12 months from the date of installation whichever is earlier.
 

AFTER SALES SERVICE

JAIVIC Power Capacitors will give trouble free performance. However in the unlikely event of any difficulty, Jaivic’s after sales service will be readily available.